Databaseaudio

Mik Sybrandt has a good range of Synthedit produced analogue style and drum synths with nicely produced GUIs...

philterkeyz is a resonant filter plugin with a difference.

Filter cutoff is controlled by midi notes and the cutoff frequency is calculated to match the frequency of each note.

Try inserting it after a vsti playing a riff. Feed that same riff to the plugin and the filter provides an added dimension. Alternatively, try inserting it after a long sweeping pad sound, then routing your midi keyboard to philterkeyz. Raise the resonance and you can play a filter line over the top of the pad.

FlitchSplifter freezes sound dynamically or midi controlled. Input Signal goes thru an envelope detector. Adjust the env-detector speed (attack + release) with the first 2 parameters. Use the slider on the right to set the threshold level. When the env.detector level exceeds threshold, the input signal gets recorded. Use the size (3rd) parameter to control the buffer size. The Rep (repeat) parameter controls how many time the buffer gets playd back after recording. The 'Smth' parameter 'smooths' the buffer loop. Wet = Dry/Wet mix, Bits = Bit reduction. The step sequencer can be used to offset the size parameter sequentially.

AU303 is a toy AudioUnit, that acts like a cheap TB303.

You've got 16 patterns, each having 16 steps and can change the note and velocity for each step. You can also change the resonance, cutoff and decay of the filter.

• Tube Booster: The fastest stereo tube preamp I've ever made!
• Wurr Audio Reverb: A small and handy VST reverb
• Wurr Audio Filtertüte: 2 band, full parametric, Hi-shelf, Lo-shelf, Eq filter with internal 4-time oversampling and speaker protection
• Green Gate: For all who use other guitar amp sims and miss the "smooth" noise gate
• Green Wah: Useful little plugin for guitar players

• Barking Wombat: polyphonic VST synthesizer with an - easy to understand - layout. The subtractive architecture of Barking Wombat enables you to create a variety of sounds.
• Wombat Solina: a polyphonic VST-Instrument based on real ARP Solina samples.

MonoMonster is a simple dualoscillator monosynth.

With concept and GUI design by Frank Bongers ( http://www.moodlex.com ), EQ-Killer is the virtual version of every DJ's number one tool.

3 adjustable bands of EQ cutting (Lo-Mid-Hi) on an elegant, simple interface for hours of fun and enjoyment.

Features :

• 3 independant oscillators, with various shapes
• Envelope control.
• 2 LFOs, controling almost everything, with speed based on tempo.
• 4 events controlers : activated with notes push and release, they change a value like a LFO.
• 16 notes polyphony.
• Glide (portamento)
• LP filter with envelope control.
• Arpeggiator.

A simple (monophonic) 5 oscillator additive synth (the first oscillator is the root - i.e. the input frequency/MIDI note). Has a scope so you can see what kind of waveform you're creating, although this part wasn't coded particularly well, so it tends to slow down your GUI updates (although not your audio playback, due to the way the VST standard works). It can be switched off by clicking on it, however. (Delphi)

Writes the input audio to a buffer and them lets you 'play' it (i.e. control the size of the buffer, and the speed at which it's played through) - works best if you've got a MIDI keyboard connected. I know the name's a misnomer, but I couldn't think of anything else to call it. (Delphi)

48db - is a multimode filter with LFO. High, low, bandpass and band reject with adjustable roll-off curve. 12, 24, 36 or even 48 DB per oct. for every mode !!! It also became an LFO with multiple waveforms. This can be routed to cutoff or resonance. Two VU meters show the output level, and two LEDs indicate the signal clipping...

• Intermodulator4 is a synthesizer / FX processor based on ring modulation
• ERIDA Delay Sampler
• Gemma FM synthesizer

LinkFilter is an effect that uses the volume of one stereo channel to control the frequency of a filter that filters the other stereo channel. It can be used as an auto-wah or if you can send two sounds to the same effect then one sound can be used to filter the other, for instance a drum-loop can be used to filter a pad.

Spectral thresholding is the process of dividing an input signal up into frequency bands (spectral), removing (or reducing) those components that lie above or below a certain level (thresholding) and then constructing the output signal from these modified spectral components.

WaveThresh is designed to be a creative sound processing tool offering unusual filtering and distortion effects. WaveThresh offers two types of analysis technique to obtain a spectral description of the input sound, Fourier and wavelet analysis...

SIR is a reverb device that works with "impulse-responses". Impulse-responses are generated by recording short broadband signals and their corresponding room-reflections. What you get contains the information needed to reproduce the same room with other signals.

The Coldcutter is designed to chop a loop into a number of slices or 'cuts' and rearranges them randomly in real-time according to a number of parameters. The current version of the Coldcutter was primarily designed for use with Ableton Live 1.5 but works with Cubase etc...

Produces a range of Synthedit plugins some of which are free:

• Clav1 : Clavinet Sample Player with a Dynamic Multi Mode Filter Section.
• RS1 : Loop slicer/player lets you load your full loop, enter the unity (original) BPM and preview @ any tempo by auto pitching to host.
• Dyna Filter 1 : Dynamic Multimode Filter + Autowah
• ChordworX takes a single note and triggers upto 7 notes to make up complete chords/arps.

Functionally, Synth1 is modelled on the Clavia Nord Lead 2 Red Synth with the following characteristics:

• 2 Oscillators, FM modulation, ring modulation, sync, modulation envelope
• 4 types of filters, distortion
• 2LFOs, arpeggiator, tempo delay, stereo chorus/flanger
• Legato mode, portamento, 16 notes polyphony, 128 presets

Thoroughly optimized for light CPU load using SSE instructions etc. It is quite possible to run 10 simultaneous instances on a Celeron 1.4 GHz system...

• Pterosaur: 16 oscillator monosynth
• Leto: Jen SX1000 emulation
• Snorgan: Wavetable-based synth
• Foxglove: Waveshaping monosynth
• Cadencia: Dual-oscillator synth
• Whistler: Resonating noise sound